The 360° Panoramic Head and Sky Trail are available in combination as a motorised panoramic system to allow time-lapse imaging and video recording with both rotational and linear motion in continuous sequence.  Available in 3 models (100-C, 150-C and 200-C) with twin analogical timers and variable spped motor.  With Sky Trail it is possible to take exposures from a minimum time of 4.5 minutes to a maximum time of 24 hours, with a 1 minute pause between images over a usable length of 180 cm in the Model 200-C.  With the Panoramic Head, it is possible to take exposures from a minimum full rotation time of 2 minutes to a maximum full rotation time of 12 hours, with pauses of 1 minute between exposures.  This allows the possibility of taking exposres of elements moving quickly or slowly, resulting in never seen before video sequences.  The simple and intuitive electronics allow real time adjustment during the exposures.  Power requirements are low and high power batteries are not needed.  The axis of rotation is supported by twin ball bearings and a clutch mechanism allows quick pointing of the camera. All models are equipped with limit switches which also allow the carriage to reverse direction, thus allowing continuous cycling.  Look at the HD video HERE and the normal resolution video Here.

Features:

• Variable speed control from 4,5 to 750 minutes (Sky Trail 200) for the entire length and from 2 to 350 minutes for one full rotation (see the table below)
• Camera shutter control via cable (included)
• Analogical intervalometer from 0,5 seconds to 56 seconds for delay between the shoots
• Analogical exposures timer from 0,5 seconds to 56 seconds for automatic or bulb mode
• “Shoot-move-shoot” function (synced)
• Timer synchronization (via cable) between the two units
• Round bubble level
• Maximum tilt angle 20°
• Limit switches (allow continuous cycling)
• CNC machined parts (alluminium-acrylic)
• Dolly with wheels system for a smooth motion and 2 haeds mounting points
• Camera cable suitable for Canon, Nikon etc.
• Rotational axis with two ball bearings and clutch for a fast framing
• Tripods locking with ¼” and 3/8” screws female
• Recommended ball head type Manfrotto #492 or similar (not included)
• For the connection between the two units is recommended Manfrotto #234 or similar (not included)
• Elegant design

Products included in the package:

• Sky Trail and 360° Panoramic Head
• Camera shutter cable (specify the camera model when ordering)
• Battery holder for type AA (8 x 1,5 volt) with power cable and two plug
• Synchronization cable
• Manuals
• 2 years warranty

Technical specifications: